Crow Ratchet Restraints 3 Inch Lap and HANS Shoulder Belts Black
Crow Racing Ratchet Restraints.
New racing technology from Crow Enterprizes allows racers to mechanically tighten their lap belts to extreme levels. Stay firmly planted in the seat lap after lap for increased safety and more consistent lap times.
Crow 3 Inch Lap and HANS Shoulder Ratchet Restraints include:
• 5 Point
• 3 inch Lap Belts
• 3 inch to 2 inch to 3 inch HANS style Shoulder Harnesses. Pull Down to tighten.
• 2 Inch Anti-Sub Belt
• You select. Ratchet on left side lap belt OR Ratchet on right side lap belt. (standard 1/4 inch ratchet wrench not included). Opposite end belt is stationary
• Bolt In or Wrap Around mounting. Not sure exactly which option you need? No worries. We have Crow set up all the points (excluding the ratchet) for "Wrap Around" mounting. There is no extra charge and the "Bolt In" hardware ends are included in the box, ready to install if you need that type of mount.
• SFI 16.1 Certified.
Note: The Ratchet Mechanism bolts directly to the lap belt tab (single shear) or tabs (double shear) which is welded to the cage and/or chassis structure. The tab(s) needs to be within arms reach of the seated and belted driver in order for that driver to tighten the lap belt with the ratchet.
New racing technology from Crow Enterprizes allows racers to mechanically tighten their lap belts to extreme levels. Stay firmly planted in the seat lap after lap for increased safety and more consistent lap times.
Crow 3 Inch Lap and HANS Shoulder Ratchet Restraints include:
• 5 Point
• 3 inch Lap Belts
• 3 inch to 2 inch to 3 inch HANS style Shoulder Harnesses. Pull Down to tighten.
• 2 Inch Anti-Sub Belt
• You select. Ratchet on left side lap belt OR Ratchet on right side lap belt. (standard 1/4 inch ratchet wrench not included). Opposite end belt is stationary
• Bolt In or Wrap Around mounting. Not sure exactly which option you need? No worries. We have Crow set up all the points (excluding the ratchet) for "Wrap Around" mounting. There is no extra charge and the "Bolt In" hardware ends are included in the box, ready to install if you need that type of mount.
• SFI 16.1 Certified.
Note: The Ratchet Mechanism bolts directly to the lap belt tab (single shear) or tabs (double shear) which is welded to the cage and/or chassis structure. The tab(s) needs to be within arms reach of the seated and belted driver in order for that driver to tighten the lap belt with the ratchet.
You May Also Like
Recently Viewed
